Search
Close this search box.
Search
Close this search box.

Support Facility, Bahrain

Fibrelite supply strong and lightweight FRP GRP trench covers to Bahrain support facility

Project overview

This client required trench access covers for two service ducts within their workshop. The previously installed steel covers had permanently deformed under heavy operational loads and sat in an uneven recess, resulting in the covers being unstable. A solution was required to support loads of up to 30 tons tonnes while being able to be safely and quickly removed by operatives to provide access to the duct for routine maintenance.

Previously installed steel covers
Previously installed steel covers
Uneven trench recess depth
Uneven trench recess depth
An uneven recess had destabilized destabilised previously installed covers
An uneven recess had destabilized destabilised previously installed covers

Problem

The challenge with this installation was twofold. Firstly, to maintain a low weight, the previously installed steel covers lacked the necessary reinforcement to resist the operational loads. This resulted in excessive deformation and failure. Secondly, the existing trench recess had an uneven depth resulting in excessive rocking of the covers.

The steel covers had buckled under the load
The steel covers had buckled under the load
Previously installed covers had also begun to corrode
Previously installed covers had also begun to corrode

Solution

The specifying engineer found Fibrelite via an online search and provided a detailed brief of the project and design parameters. Using these, Fibrelite provided a retrofit solution, custom engineering and manufacturing their FRP GRP trench access covers to suit the client’s requirements. The Fibrelite trench covers that were installed have a load rating of 30 tons tonnes (Fibrelite covers are available with load ratings up to 90 tons tonnes) and the FRP GRP covers are corrosion resistant therefore will have a longer lifetime than the previously installed metal covers.

A custom aluminum aluminium frame was installed to improve the stability of the covers, providing an even surface on which to place the new trench covers. Fibrelite’s trench access covers can be removed safely and easily by two people using their ergonomic FL7 lifting handles.

Fibrelite’s trench access covers will not deform under heavy loads
Fibrelite’s trench access covers will not deform under heavy loads
A custom aluminum aluminium frame provides a stable base for the covers
A custom aluminum aluminium frame provides a stable base for the covers
Author:
Picture of David Holmes

David Holmes

Author Bio
Share this story on
LinkedIn

Featured products:

Back to
case studies

D400
Trench Covers

FL7
Lifting Handles

Download
PDF

Contact us to discuss your project